- 79 -
Maintenance Section
Drive Axle Oil
NOTE : Do not use Gear Oil in the final drives or
differentials. Gear Oil can cause seal material to
fail and possibly leak oil.
NOTE : Failure to follow the recommendation will
cause shortened life due to excessive gear wear.
The API CD/TO-2 or CD/TO-4 specification or
MIL-L-2104D,E or F oils could be used.
NOTE : Multi-grade oils are not blended by
DAEWOO for use in transmissions. Multi-grade
oils which use high molecular weight polymers as
viscosity index improvers lose their viscosity effec-
tiveness by permanent and temporary shear of the
viscosity index improver and therefore, are not
recommended for transmission and drive train
compartments.
Gear Oil
Select on oil that meets. API GL-5 spec or
MIL-L-2105C spec.
To Next Page
Loading...
