Daewoo D45S-2 - Page 82

- 67 -
• Flywheel
1) Apply engine oil on the flywheel bolt.
2) Orderly tighten the fly wheel bolt.(see figure)
• Injection Pump
Tighten the injection pump bolts to a specified torgue
for "C" marks of injection pump gear and idle gear to
be aligned each other.
• Crank shaft pulley nut
Tighten a nut with wrench.
EJM2142S
EJM1029S
EJM2130S
EJM2144S
EJM2145S
Bolt Torque 22.3
L
2.2 kg•m
Bolt Torque 2.6
L
0.5 kg•m
Torque 60.0
L
5.0 kg•m
• Tappet Chamber Cover
Tighten a bolt with gasket and liquid gasket.
Torque 2.6
L
0.5 kg•m
Injection pump
gear
Idle gear
´´ B ´´ mark
´´ C ´´ mark
Camshaft
gear
´´ A ´´ mark
Crankshaft gear
Crank
shaft
gear
Lubricate with enging oil
pulley
wrench
gasket