Daewoo DE12T - 3 Disassembly and Reassembly of Major Components; General Precautions

3. DISASSEMBLY AND REASSEMBLY OF MAJOR COMPONENTS
3.1. Disassembly
3.1.1. General precautions
•
Maintenance operation should be carried out in a bright and clean place.
•
Before disassembly, provide parts racks for storage of various tools and disassembled parts.
•
Arrange the disassembled parts in the disassembly sequence and use care to prevent any
damage to them.
3.1.2. Cooling water
•
Remove the radiator cap. Open the
drain plug at the radiator lower part to
drain the coolant as the right figure.
CAUTION :
When removing radiator filler cap
while the engine is still hot, cover the
cap with a rag, then turn it slowly to
release the internal steam pressure
This will prevent a person from
scalding with hot steam spouted out
from the filler port.
•
Remove the drain plug from the cylin-
der block and drain out the cooling
water into a container.
- 48 -
DISASSEMBLY
Drain Valve
EA5O4002
EB8O3010