Daewoo DE12T - Crank Shaft; Crankshaft Gear and Oil Pump Idle Gear; Timing Gear Case

3.1.39. Crankshaft gear and oil pump idle gear
•
Loosen the socket head bolts and
take out the oil pump idle gear.
•
Use a puller to remove the crankshaft
gear.
3.1.40. Timing gear case
•
Unscrew the case fixing bolts and dis-
assemble the timing gear case.
3.1.41. Crank shaft
•
Remove the main bearing cap fixing
bolts in the opposite direction of
assembling.
•
Maintain the removed bearing caps in
the order of cylinders.
•
Temporarily install the bolts at the
both side of crankshaft, and lift the
shaft with a rope.
NOTE :
Do not mingle with the metal bear-
ings and bearing caps randomly. To
prevent mixing, temporarily assem-
ble the metal bearings to the corre-
sponding bearing caps in turn.
- 59 -
DISASSEMBLY
EAMD046I
EAMD047S