3.3.36. Injection pipe
•
Semi-assemble a nut at both ends of
the fuel high pressure pipe and tighten
them up one by one to specified
torque.
•
Tighten hollow screws to assemble
the fuel return pipe.
•
Assemble the fuel return hose on the
fuel injection pump.
3.3.37. Fuel filter
•
Assemble the fuel filter with the air
pipe bracket.
•
Assemble the fuel feed hose accord-
ing to the direction of an arrow
impressed on the fuel filter head so
that fuel can be fed in the sequence of
FUEL FEED PUMP FUEL FILTER
FUEL INJECTION PUMP.
3.3.38. Cylinder head cover
•
Assemble the cover packing with the
cover, install the cover on the head,
then tighten the fixing bolts in
sequence to specified torque.
•
Assemble the breather hose with PCV
valve.
- 96 -
REASSEMBLY
To Next Page
Loading...
