DAF LF45 Series - Page 214

1SEATS
Removal and installation LF45/55 series
4-24
8. Disconnect the manifold (9) from the air
pipes.
9. Remove the attachment bolts (7) from the
rear hinges on the framework.
10. Set the largest possible angle and remove
the front hinge bolts (8) from the
framework.
11. Disconnect the air pipes from the
framework.
Installing seat squab framework
1. Attach the framework on t he frame using
the front hinge bolts (8). Fit the air pipes.
2. Fit the rear hinges of the framework using
the attachment bolts (7).
3. Fit the manifold (9).
4. Connect the control cable of the height
control valve (6) and the vertical
damper (5).
5. Fit the dust boot.
6. Fit the backrest, the belt and the cover
panels.
7. Fit the seat squab.
8. Install the seat assembly.
3
4
1
6
7
8
2
5
9
K0 01 403
7
ǹ 0210
https://www.truck-manuals.net/