1
LF45/55 series Removal and installation
SEATS
4-23
6. Push the air bellows positioning bush (4)
out of the upper cross member.
7. Loosen the air bellows a quarter stroke
from the lower cross member (3). Take the
air bellows out of the lower cross member.
8. Remove the air bellows from behind the
seat frame.
Installing air bellows
1. Place the air bellows in the seat frame
between the upper and lower cross
members.
2. Turn the air bellows into the lower cross
member (3). Pay attention to the position of
the air pipe (2).
3. Fit the air bellows in the upper cross
member using the attachment bolt (1); pay
attention to the positioning bush (4).
4. Connect the air pipe (2) of the air bellows to
the quick-release coupling (5).
5. Remove the seat lock.
6. Fit the seat squab.
7. Install the seat assembly.
1
2
4
3
5
K1 01 401
4.28 REMOVAL AND INSTALLAT ION, SEAT SQUAB FRAMEWORK
Removing seat squab framework
1. Remove the seat assembly.
2. Remove the seat squab.
3. Remove all cover panels.
4. Remove the backrest (3) with the
belt (1, 2).
5. Detach the dust boot from the framework.
6. Detach the control cable (5) from the
vertical damper adjuster.
7. Disconnect the control cable (6) from the
height control valve.
7
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
