NP 2000 MAX 1 / 1
Indicates that the FADEC commands a high Np (PROP RPM) due to:
- an avionics failure, or
- an overtorque, or
- a FCU runaway (fuel metering valve fully open).
► Fly the airplane ◄
CAUTION
The F
ADEC commands Np (PROP RPM) at 2,000 RPM and maximum torque
is reduced to around 96% to comply with engine power limitations.
In flight:
► Do not engage AT ◄
1 - THROTTLE ...............................................................................
Reduce
To acceptable TRQ level
► Land as soon as practicable ◄
Inform maintenance department.
Repair before further flight.
End of procedure ■
On ground:
► Do not take off ◄
Inform maintenance department.
The airplane is grounded, repair before further flight.
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 00
Page 3A.3.9
PIM - DO NOT USE FOR FLIGHT OPERATIONS
To Next Page
Loading...