Daher TBM 960 - 5.11 - Cruise Performance

5.11 -
Cruise Performance
Maximum Cruise
The
following
table
provides references to performance tables that should be used
depending on INERT SEP ON/OFF status and bleed status.
NOTE In the table below:
- Bleed status "P2.5" =
P2.5 HI and P3 messages are OFF,
- Bleed status "P2.5 HI or P3" = P2.5 HI or P3 message is ON.
Table 5.11.1 - References to MXCR Performance Tables
INERT
SEP
Bleed
status
ISA - 20 °C ISA - 10 °C ISA - 5 °C ISA
OFF
P2.5 Table 5.11.2 Table 5.11.3 Table 5.11.4 Table 5.11.5
P2.5 HI or
P3
Table 5.11.9 Table 5.11.10 Table 5.11.11 Table 5.11.12
ON
P2.5 Table 5.11.16 Table 5.11.17 Table 5.11.18 Table 5.11.19
P2.5 HI or
P3
Table 5.11.23 Table 5.11.24 Table 5.11.25 Table 5.11.26
INERT
SEP
Bleed
status
ISA + 5 °C ISA + 10 °C ISA + 20 °C
OFF
P2.5 Table 5.11.6 Table 5.11.7 Table 5.11.8
P2.5 HI or
P3
Table 5.11.13 Table 5.11.14 Table 5.11.15
ON
P2.5 Table 5.11.20 Table 5.11.21 Table 5.11.22
P2.5 HI or
P3
Table 5.11.27 Table 5.11.28 Table 5.11.29
Section 5
Performance
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 01
Page 5.11.
1
PIM - DO NOT USE FOR FLIGHT OPERATIONS