Daher TBM 960 - Maximum Climb Power - 170 KIAS; M 0.40

Maximum Climb Power – 170 KIAS / M 0.40
NOTE The following table provides references to torque tables that should be
used depending on INERT SEP ON/OFF status and bleed status.
In the table below:
- Bleed status "P2.5" = P2.5 HI and P3 messages are OFF,
- Bleed status "P2.5 HI or P3" = P2.5 HI or P3 message is ON.
Table 5.8.10 - References to MXCL Torque Tables – 170 KIAS / M 0.40
INERT SEP Bleed status FL < 200 FL > 200
OFF
P2.5 Table 5.8.11 Table 5.8.12
P2.5 HI or P3 Table 5.8.13 Table 5.8.14
ON
P2.5 Table 5.8.15 Table 5.8.16
P2.5 HI or P3 Table 5.8.17 Table 5.8.18
Section 5
Performance
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 01
Page 5.8.19
PIM - DO NOT USE FOR FLIGHT OPERATIONS