Daher TBM 960 - Acft Conf Mism

ACFT CONF MISM 1 / 1
With or without GEAR UNSAFE .
Indicates that the flaps and/or landing gear positions do not agree with the FLAPS
and LANDING GEAR levers positions.
1 -
Flaps and landing gear configuration ................................................... Check
2 - FLAPS lever .................................................. Set to agree with flaps position
3 - LANDING GEAR lever ...................... Set to agree with landing gear position
Maximum airspeeds:
Flaps TO 178 KIAS
Flaps LDG 122 KIAS
Landing gear down 178 KIAS
Landing gear extension 178 KIAS
Landing gear retraction 150 KIAS
If GEAR UNSAFE is ON:
4 - Perform procedure ..................... Landing Gear Extension Discrepancy
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 01
Page 3A.7.14
PIM - DO NOT USE FOR FLIGHT OPERATIONS