Daher TBM 960 - Runway Clear

Runway Clear 1 / 1
Runway clear - airplane stopped
CAUTION
Generator load < 200 A.
1 - THROTTLE ........................................................................................... Adjust
To get minimum TRQ for taxiing
NOTE
A two minutes minimum cool down period is required prior to engine shutdown.
It starts when exiting the runway and ends at shutdown. Taxi time can be
accounted provided that Ng never exceeds 70% and reverse is not used.
2 - TAXI lights ................................................................................................. ON
3 - NAV
switch ................................................................................................ ON
4 - STROBE switch ....................................................................................... OFF
5 - DE ICE SYSTEM mode switch ............................................................. AUTO
6 - INERT SEP switch ......................................................................... Check ON
7 - PITOT L/R & STALL HTR switch ............................................................. OFF
8 - TRIMS ......................................................................................... Reset to TO
9 - FLAPS lever .............................................................................................. UP
10 - FAN selector ................................................................................. As required
11 - XPDR .......................................................................................... Check GND
12 - WX radar ............................................................................ Check STANDBY
The weather radar automatically sets to STANDBY upon
touchdown
End of procedure.
Pilot's Information Manual
Section 4
Normal Procedures
PIM TBM 960 - Edition 0
Rev. 01
Page 4.4.62
PIM - DO NOT USE FOR FLIGHT OPERATIONS