Daher TBM 960 - Inert Sep Fail

INERT SEP FAIL 1 / 1
Symptoms:
- INERT SEP ON is not displayed within 50 seconds following INERT SEP
switch setting ON,
- inertial separator is not retracted after 50 seconds following INERT SEP
switch setting OFF,
- INER
T DE ICE breaker triggered.
► Leave icing conditions as soon as possible ◄
► Fly the airplane ◄
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 00
Page 3A.11.3
PIM - DO NOT USE FOR FLIGHT OPERATIONS