XPDR1 FAIL or XPDR2 FAIL 1 / 1
Indicates that transponder 1 [or transponder 2] is inoperative.
► Fly the airplane ◄
If transponder 2 [or transponder 1] is available:
1 - Set transponder 2 [or transponder 1] as active.
2 - Continue the flight.
Inform maintenance department.
End of procedure ■
If transponder 2 [or transponder 1] is unavailable:
3
- Inform Air Traffic Control of the loss of the second transponder.
4 - Leave controlled airspace.
5 - Continue the flight.
Inform maintenance department.
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 00
Page 3A.12.17
PIM - DO NOT USE FOR FLIGHT OPERATIONS
To Next Page
Loading...