Flight into Known Icing Conditions 3 / 4
► Continuing
3 - IGNITION pushbutton ...................................................................... ON
Status light in green
NOTE
IGNITION pushbutton may be left ON for a long period.
NOTE
The INERT SEP switch must be left ON while the airplane remains in
icing conditions.
CAUTION
If airplane leaves icing conditions, maintain INERT SEP switch to ON as
long as ice thickness on non-deiced visible parts exceeds 15 mm (or ½
in).
This will avoid ice fragments coming from propeller spinner and being ingested by
engine.
Procedures for holding, approach and landing in icing conditions:
- Minimum recommended airspeeds are:
Weight
< 6,579 lbs (2,984 kg) > 6,579 lbs (2,984 kg)
Flaps UP 130 KIAS 135 KIAS
Flaps T
O 110 KIAS 115 KIAS
Flaps LDG 90 KIAS 95 KIAS
Continue ►
Pilot's Information Manual
Section 4
Normal Procedures
PIM TBM 960 - Edition 0
Rev. 01
Page 4.5.4
PIM - DO NOT USE FOR FLIGHT OPERATIONS
To Next Page
Loading...