Left-side and right-side front seats are mounted on rails attached to the structure.
Longitudinal position, height and
backrest tilting of each seat can be adjusted and
the armrest is hinged.
Pull up the handle located forward for longitudinal setting.
The seat height is adjusted by pulling up side forward handle while relieving the
seat from the body weight.
The seat back angle is adjusted by pulling up side rearward handle.
Passenger Seats
>> With 6-seat accommodation
See
Figure 7.3.14.
The accommodation consists of:
- two individual seats, installed
back to the flight direction, mounted on the
same rails as the front seats. The seat back angle is adjusted by pulling up
side handle.
- two rear seats arranged as a bench, mounted on the same rails as the front
seats. The seat backrests tilt forward by pulling up the handle located
forward on left side of each seat which may tilt forwards by pulling up a rear
handle to ease baggage loading in baggage compartment. For longitudinal
setting pull up the handle located forward, on right side.
>> With 4-seat accommodation
See
Figure 7.3.15.
The accommodation consists of:
- two individual seats, installed
facing flight direction, mounted on the same
rails as the front seats. The seat back angle is adjusted by pulling up side
handle.
>> All
Section 7
Description
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 01
Page 7.3.31
PIM - DO NOT USE FOR FLIGHT OPERATIONS
To Next Page
Loading...