5. Fold the reservoir bag away from breathing valves and into the facepiece.
Make sure the bag does not cover the breathing valves.
Breathing valves
Top view
Bottom view
I4352100AAABMA8400
6. Coil the oxygen tubing inside facepiece over the reservoir bag.
7. Connect oxygen tubing to the manifold oxygen fitting.
Section 8
Handling, Servicing and Maintenance
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 00
Page 8.7.12
PIM - DO NOT USE FOR FLIGHT OPERATIONS
To Next Page
Loading...