User's Manual
102
Figure 5-57 Pattern
Step 3 In the
Pattern
box, enter the value for pattern.
Step 4 Click
Start
to perform the directions operations. You can also go to the PTZ Control Panel
to perform the operations of adjusting zoom, focus, iris, and directions.
Step 5 On the
PTZ
page, click
End
to complete the settings.
5.4.3.4 Configuring Scan
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Scan
tab.
Figure 5-58 Scan
Step 3 Click the direction arrows to position the left and right limits.
To Next Page
Loading...
