User's Manual
243
Parameter Description
More Setting
●
Show Message: Select the
Show Message
checkbox to
enable a pop-up message in your local host PC.
●
Buzzer: Select the checkbox to activate a buzzer noise at the
Device.
●
Video Matrix: Select the checkbox to enable the function.
When an alarm event occurs, the video output port outputs
the settings configured in
Main Menu
>
DISPLAY
>
Tour
.
This function is available on select models.
●
Send Email: Enable the system to send an email notification
when an alarm event occurs.
To use this function, make sure the email function is enabled
in
Main Menu
>
NETWORK
>
Email
.
●
Log: Select the checkbox to enable the Device to record a
local alarm log.
Step 4 Click
Save
to save the settings.
5.12.2.5 Searching IoT Information
You can search and backup all your IoT data. To back up the data, you should prepare a USB device
and plug it into the Device.
Procedure
Step 1 On the home page, select
IoT
>
IOT Search
.
Figure 5-207 IoT search
To Next Page
Loading...
Need help?
General
