Dahua Technology DH-XVR1B04-I - Configuring Network Event Settings

User's Manual
175
Parameter Description
Send Email
Select the
Send Email
checkbox to enable the system to send an email
notification when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main
Menu
>
NETWORK
>
Email
.
Buzzer Select the checkbox to activate a buzzer noise at the Device.
Log Select the checkbox to enable the Device to record a local alarm log.
Alarm Tone
Select to enable audio broadcast/alarm tone in response to an HDD alarm
event.
Step 3 Click
Apply
to complete the settings.
5.10.5.2 Configuring Network Event Settings
Procedure
Step 1 Select
Main Menu
>
ALARM
>
Exception
>
Network
.
Figure 5-129 Network
Step 2 Configure the settings for the Network event.
Table 5-42 Network event settings
Parameter Description
Event Type
In the
Event Type
list, select
Offline
,
IP Conflict
, or
MAC Conflict
as the
event type.
Enable Enable or disable the Network event detection function.