User's Manual
112
Figure 5-66 Snapshot
Step 2 Configure the settings for the snapshot parameters.
Table 5-26 Snapshot parameters
Parameter Description
Manual Snapshot
In the
Manual Snapshot
list, select how many snapshots you want
to take each time.
Channel
In the
Channel
list, select the channel that you want to configure
the settings for.
Type
In the
Type
list, you can select
Scheduled Event
, or
Face
Snapshot
as the event type for which you want to take a snapshot.
●
Scheduled
: The snapshot is taken during the scheduled
period.
●
Event
: The snapshot is taken when there is an alarm event
occurs, such as motion detection event, video loss, and local
alarms.
●
Face Snapshot
: The snapshot is taken when the face is
detected. The face detection function is support only with the
Channel 1.
Size
In the
Size
list, select a value for the image. The bigger the value is,
the better the image will become.
Quality
Configures the image quality by 6 levels. The higher the level, the
better the image will become.
To Next Page
Loading...
Need help?
General
