User's Manual
274
Figure 5-238 Add user
Step 3 Configure the settings for the parameters of adding a user account.
Table 5-66 Parameters of adding user
Parameter Description
Username
Enter a username and password for the account.
Password
Confirm Password Re-enter the password.
Remarks
Optional.
Enter a description of the account.
User MAC Enter user MAC address
Group
Select a group for the account.
The user rights must be within the group permission.
Period
Click
Setting
to configure the parameters.
Define a period during which the new account can log in to
the device. The new account cannot log in to the device
during the time beyond the set period.
Password Expires in Set the password validity period.
Permission
In the
Permission
area, select the checkboxes in the
System
tab,
Playback
tab, and
Monitor
tab.
To manage the user account easily, when defining the user
account authority, it is recommended not to give the
authority to the common user account higher that the
advanced user account.
Step 4 Click
OK
to complete the settings.