User's Manual
48
●
The pattern that you want to set must cross at least four points.
●
If you do not want to configure the unlock pattern, click
Skip
.
●
Once you have configured the unlock pattern, the system will require the unlock
pattern as the default login method. If you skip this setting, enter the password for
login.
Figure 5-5 Password protection
Step 9 Configure the protection parameters for password.
After configuration, if you forget the password for admin user, you can reset the password
through the reserved email address or security questions.
If you do not want to configure the settings, disable the email address and security
questions functions on the interface.
Table 5-2 Password protection parameters
Password Protection Mode Description
Reserved Email
Enter the reserved email address.
In the
Reserved Email
box, enter an email address for
password reset. If you forget the password, enter the
security code that you will get from this reserved email
address to reset the password of admin.
Security Questions
Configure the security questions and answers.
If you forget the password, enter the answers to the
questions can make you reset the password.
If you want to configure the email or security questions function later or you want to change the
configurations, select
Main Menu
>
ACCOUNT
>
Password Reset
.
Step 10 Click
OK
to complete the settings.
Step 11 Select
I have read and agree to all terms
checkbox.
Step 12 Click
Next
.
The
Startup Wizard
interface is displayed.
To Next Page
Loading...
Need help?
General
