Dahua Technology XVR4 Series User Manual

Local Configurations 107
Select the uninitialized device that you want to initialize. Step 3
Click Initialize. Step 4
The Enter Password interface is displayed. See Figure 5-73.
Figure 5-73
Configure the password and email information. Step 5
If you select the Using current device password and email info check box, the
remote device automatically uses the current password and email information, so you
do not need to set the password and email address again and can go to Step 6.
Clear the Using current device password and email info check box. 1)
The password setting interface is displayed. See Figure 5-74.
Figure 5-74
Configure the settings for the password setting parameters. See Table 5-29. 2)
Parameter
Description
User
The default is admin.
Password
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and

Dahua Technology XVR4 Series Specifications

General

Brand	Dahua Technology
Model	XVR4 Series
Category	DVR
Language	English