Local Configurations 162
Select the Send Email check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > EMAIL.
Select the check box to activate a buzzer noise at the Device.
Select the check box to enable the Device to record a local alarm log.
Select to enable audio broadcast/voice prompts in response to a user
account alarm event.
Table 5-43
Click Apply to complete the settings. Step 3
5.11 Configuring IVS Function
The IVS function processes and analyzes the images to extract the key information to match
with the preset rules. When the detected behaviors match with the rules, the system activates
alarms.
The IVS function and face detection function cannot be enabled at the same time.
5.11.1 Configuring Intelligent Settings
You can configure the intelligent settings for both analog cameras and IP cameras.
Not all models support this function.
Please disable the expanded IP channels first before using this function for analog
cameras.
Select Main Menu > IVS > INTELL SETTING. Step 1
The INTELL SETTING interface is displayed. See Figure 5-133.
To Next Page
Loading...
Need help?
General