Local Configurations 199
Figure 5-174
Click Locked to lock the data. Step 3
The export button is enabled.
Click Export. The system starts exporting the data. Step 4
After exporting is finished, a Message dialog box is displayed.
Click OK. Step 5
You can find the exported data on your USB device.
5.13.2.4 Configuring Alarm Linkage
You can configure alarm linkage settings for temperature and humidity data.
5.13.2.4.1 Configuring Alarm Linkage for Temperature Data
On the main interface, select IoT > MANAGER > Temperature/Humidity. Step 1
The Temperature/Humidity interface is displayed. See Figure 5-175.
To Next Page
Loading...
Need help?
General