Figure 4-8
Step 2. Select font size and solution. Set OSD font.
Step 3. Set channel title and location.
a) Select channel title.
b) Check Turn on.
c) Input channel name.
d) Use the mouse to drag the yellow box or change the regional point coordinates, select the
channel position title.
e) Click Save.
Step 4. Set time title and position.
f) Select time title.
g) Check Turn on.
h) Check week.
i) Use the mouse to drag the yellow box or change the regional point coordinates, select the time
the title of the position.
j) Click Save.
Step 5. You can click to add customized region, define OSD info.
The system supports up to 3 customized regions.
Step 6. Click Save.
4.1.4.2 Snap OSD
To Next Page
Loading...
