165
Figure 5-21
Step 3 Select a camera to be initialized and then click Initialize button.
Device displays password setup interface. See Figure 5-22.
Figure 5-22
Step 4 Set camera password.
Using current device password and email: Check the box to use DVR current admin
account and email information. There is no need to set password and email. Please go to step 7.
User name/password: The user name is admin. The password ranges from 8 to 32 digitals.
It can contain letters, numbers and special characters (excluding “'”,“"”,“;”,“:”,“&”) . The password
shall contain at least two categories. Usually we recommend the strong password.
WARNING
STRONG PASSWORD RECOMMENDED-For your device own safety, please create a
strong password of your own choosing. We also recommend you change your password
periodically especially in the high security system.
Step 5 Click Next button.
To Next Page
Loading...
