167
Check Static, and then input IP address, subnet mask, default gateway and incremental
value.
Note
If it is to change several devices IP addresses at the same time, please input incremental
value. Device can add the fourth address of the IP address one by one to automatically
allocate the IP addresses.
If there is IP conflict when changing static IP address, device pops up IP conflict dialogue
box. If batch change IP address, device automatically skips the conflicted IP and begin the
allocation according to the incremental value
Step 8 Click Next button.
Device begins initializing camera. See Figure 5-25.
Figure 5-25
Step 9 Click OK to complete the initialization.
Manual Add
To Next Page
Loading...
