Figure 5-67 Manual add
Step 4 Conîš‚gure the parameters.
The parameters might vary depending on the manufacturer that you select.
Table 5-17 Remote channel parameters
Parameter
Description
Channel
Select the channel that you want use on the Device to connect the
remote device.
Manufacturer
Select the manufacturer of the remote device.
Please connect the Imou camera to the Device through the ONVIF
protocol, otherwise the Imou camera added through private
protocols cannot be connected.
Registration ID Enter the registration ID of the remote device.
IP Address Enter the IP address of the remote device.
RTSP Port Enter the RTSP port number. The default value is 554.
HTTP Port Enter the HTTP port number. The default value is 80.
TCP Port The default value is 37777. You can enter the value as needed.
Username Enter the username of the remote device.
Password Enter the password of the user for the remote device.
User's Manual
185
To Next Page
Loading...
Need help?
General
