Dahua NVR52-4KS2 SERIES User Manual

5.7.3.2 Changing IP Address of Unconnected Cameras
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 Click Search Device.
The remote devices found are displayed at the upper pane.
Step 3 Click , or select one or more remote devices and then click Modify IP.
When changing the IP addresses of multiple remote devices at the same time, make sure
that they share the same username and password.
Step 4 Enter username and password of the remote device, and then congure the IP address.
●
DHCP : The remote device gets a dynamic IP address automatically.
●
Static : You need to enter static IP address, subnet mask, and default gateway. When
changing IP addresses of multiple remote devices at the same time. enter the
incremental value so that the system can add the fourth decimal digit of the IP address
one by one according to the incremental value.
Step 5 Click OK.
5.7.4 Conguring Image Settings
You can set network camera parameters according to dierent environments to get the best video
eect.
Procedure
Step 1 Select Main Menu > CAMERA > Image.
User's Manual
188

Dahua NVR52-4KS2 SERIES Specifications

General

Brand	Dahua
Model	NVR52-4KS2 SERIES
Category	Network Hardware
Language	English