EasyManuals Logo

Dahua NVR52-4KS2 SERIES User Manual

Dahua NVR52-4KS2 SERIES
493 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #378 background imageLoading...
Page #378 background image
Parameter Description
Read/Write Username
Enter the username that is allowed to access the Device and has the read
and write permission.
Authentication Type Select MD5 or SHA. The system recognizes the type automatically.
Authentication
Password
Enter the password for authentication. The password should be no less
than eight characters.
Encryption Type Select an encryption type. The default setting is CBC-DES.
Encryption Password Enter the encryption password.
Step 4 Click Apply.
Step 5 Compile the two MIB les by MIB Builder.
Step 6 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 7 On the MG-SOFT MIB Browser, enter the device IP that you want to manage, and then
select the version number to query.
Step 8 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
congurations of the Device, such as the channels quantity and software version.
5.11.14 Multicast
When you access the Device from the network to view the video, if the access is exceeded, the
video will not display. You can use the multicast function to group the IP to solve the problem.
Procedure
Step 1 Select Main Menu > NETWORK > Multicast.
Figure 5-236 Multicast
Step 2 Congure the parameters.
User's Manual
362

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua NVR52-4KS2 SERIES and is the answer not in the manual?

Dahua NVR52-4KS2 SERIES Specifications

General IconGeneral
BrandDahua
ModelNVR52-4KS2 SERIES
CategoryNetwork Hardware
LanguageEnglish

Related product manuals