Dahua NVR52-4KS2 SERIES User Manual

Figure 5-230 Added channel
Step 5 Click Apply.
5.11.9 PPPoE
PPPoE is another way for the Device to access the network. You can establish network connection
by conguring PPPoE settings to give the Device a dynamic IP address on the WAN.
Prerequisites
To use this function, rstly you need to obtain the username and password from the Internet
Service Provider.
Procedure
Step 1 Select Main Menu > NETWORK > PPPoE.
Figure 5-231 PPPoE
Step 2 Enable the PPPoE function.
Step 3 Enter the username and password provided by the Internet Service Provider.
Step 4 Click Apply.
User's Manual
354

Dahua NVR52-4KS2 SERIES Specifications

General

Brand	Dahua
Model	NVR52-4KS2 SERIES
Category	Network Hardware
Language	English