Figure 5-128 AI by camera
Step 3 Enable Face Enhancement to make the faces displayed more clear.
Step 4 Click Rule to draw areas to îš‚lter the target.
You can conîš‚gure two target îš‚lters (maximum size and minimum size). When the target
is smaller than the minimum size or larger than the maximum size, no alarms will be
activated.
Step 5 Select target face database, and then click to conîš‚gure alarm linkage. For details on
alarm linkage, see Table 5-50 .
Step 6 Click Apply.
5.9.6.5 AI Search (Face Recognition)
You can search for the face recognition results by attributes or by image.
5.9.6.5.1 Search by Attributes
Procedure
Step 1 Select Main Menu > AI > AI Search > Face Recognition > Search by Attributes.
User's Manual
248
To Next Page
Loading...
Need help?
General
