Figure 5-158 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click
to set the period.
3. Congure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.7.3 AI Search (IVS)
You can search for IVS detection results.
Procedure
Step 1 Select Main Menu > AI > AI Search > IVS.
Figure 5-159 IVS search
Step 2 Select a channel, start time, end time, event type, and then click Search.
User's Manual
276
To Next Page
Loading...
Need help?
General
