Parameter Description
Send Email
Enable the system to send an email to notify you when an alarm occurs.
Make sure that the email settings have been conîš‚gured in Main Menu >
NETWORK > Email.
Record Channel When an alarm occurs, the system activates recording of the selected
channel. After the alarm ends, the recording continues for a period of
time depending on the deîš‚ned value for Post-Record.
Make sure that intelligent recording schedule and auto recording have
been conîš‚gured. For details, see "5.8.1 Recording Schedule".
Post-Record
PTZ Linkage
When an alarm occurs, the NVR associates the channel to perform the
corresponding PTZ action. For example, rotate the PTZ to the preset
point.
Make sure that PTZ actions have been conîš‚gured. For details, see "5.6.7
PTZ".
Tour
When an alarm occurs, the local page of the NVR displays the image of the
selected channels in turn.
Make sure that the time interval and mode for tour have been conîš‚gured
in Main Menu > DISPLAY > Tour Setting.
Picture Storage
When an alarm occurs, the system takes a snapshot of the channel and
stores the snapshot on the Device.
Make sure that snapshot schedule and snapshot mode have been
conîš‚gured. For details, see "5.8.1 Recording Schedule".
Buzzer The system activates the buzzer when an alarm occurs.
Log When an alarm occurs, the system records the event in the logs.
Alarm Tone
When an alarm occurs, the system plays the selected audio îš‚le.
Make sure that the audio îš‚les have been uploaded to the system. For
details, see "5.18.1 File Management".
User's Manual
308
To Next Page
Loading...
Need help?
General
