Table 5-53 Video quality analytics parameters
Parameter Description
Stripe
Stripes refer to the striped interferences in the video which might be
due to device aging or signal interference. The stripe might be
horizontal, vertical, or oblique.
Noise
Video noise refers to the distortion of optical system or the degradation
of image quality caused by hardware equipment during transmission.
Color Cast
An image in the video is generally a colorful image that contains color
information, such as RGB. When these three components appear at
some unusual scale in an image, the image is biased.
Defocus
An image with high resolution contains more details, but image blur is a
common problem of image quality decrease which is caused by many
factors in the process of image acquisition, transmission and processing,
and is dened as virtual focus in video diagnosis.
Overexpose
The brightness of the image refers to the intensity of the image pixels.
Black is the darkest and white is the brightest. Black is represented by 0
and white is represented by 255. When the brightness value exceeds
the threshold, the image is over exposed.
Step 5 Click OK.
Step 6 Click Setting next to Schedule to congure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click
to set the period.
Step 7 Congure alarm linkage actions. For details, see Table 5-50 .
Step 8 Click Apply.
5.9.17.2 Analytics List
Search for the results of video quality analytics.
Procedure
Step 1 Select Main Menu > AI > AI Search > Analytics List.
Step 2 Select the start time and end time.
Step 3 Select one or more channels.
Step 4 Click Search.
User's Manual
316
To Next Page
Loading...
Need help?
General
