Figure 5-209 Video Loss
Step 2 Select a channel and then click to enable the function.
Step 3 Click Setting next to Schedule to conîš‚gure the alarm schedule.
Step 4 Conîš‚gure alarm linkage. For details, see Table 5-50 .
Step 5 Click Apply.
5.10.5.3 Video Tampering
When the camera lens is covered, or the video is displayed in a single color because of sunlight
status, the monitoring cannot be continued normally. To avoid such situations, you can conîš‚gure
the tampering alarm settings.
Procedure
Step 1 Select Main Menu > ALARM > Video Detection > Video Tampering.
User's Manual
332
To Next Page
Loading...
Need help?
General
