Figure 5-234 Email
Step 2 Click to enable the function.
Step 3 Conîš‚gure the email parameters.
Table 5-67 Email parameters
Parameter
Description
SMTP Server Enter the address of SMTP server of sender’s email account.
Port Enter the port of SMTP server. The default value is 25.
Username
Enter the username and password of sender’s email account.
Password
Anonymous Enable anonymous login.
Receiver
Select the receiver to receive the notiîš‚cation. You can select up to three
receivers.
Email Address Enter the email address of mail receivers.
Sender
Enter the sender’s email address. You can enter up to three senders
separated by comma.
Subject
Enter the email subject.
You can enter Chinese, English and numerals with the length limited to
64 characters.
Attachment
Enable the attachment function. When there is an alarm event, the
system can attach snapshots as an attachment to the email.
User's Manual
359
To Next Page
Loading...
Need help?
General
