Figure 5-298 Tour
●
On the top right of the live view screen, use the left mouse button or press Shift to
switch between (image switching is allowed) and (image switching is not
allowed) to turn on/o the tour function.
●
On the navigation bar, click
to enable the tour and click to disable it.
Step 2 Congure the tour setting parameters.
Table 5-87 Tour parameters
Parameter
Description
Enable Tour Enable tour function.
Interval
Enter the amount of time that you want each channel group displays on
the screen. The value ranges from 5 seconds to 120 seconds, and the
default value is 5 seconds.
Motion Tour, Alarm
Tour
Select the View 1 or View 8 for Motion Tour and Alarm Tour (system
alarm events).
Live Layout
In the Live Layout list, select View 1, View 4, View 8, or other modes that
are supported by the Device.
User's Manual
420
To Next Page
Loading...
Need help?
General
