Dahua NVR52-4KS2 SERIES User Manual

Figure 5-322 Default
Step 2 Restore the settings.
●
Default: Restore all the congurations except network settings and user management
to the default.
●
Factory Default: Restore all the congurations to the factory default settings.
5.19.4.3.2 Resetting Device through the Reset Button
Background Information
You can use the reset button on the mainboard to reset the Device to the factory default settings.
After resetting, all the congurations will be lost.
The reset button is available on select models.
Procedure
Step 1 Disconnect the Device from power source, and then remove the cover panel. For details
about removing the cover panel, see "3.3 HDD Installation".
Step 2 Find the reset button on the mainboard, and then connect the Device to the power
source again.
Step 3 Press and hold the reset button for 5 seconds to 10 seconds.
User's Manual
443

Dahua NVR52-4KS2 SERIES Specifications

General

Brand	Dahua
Model	NVR52-4KS2 SERIES
Category	Network Hardware
Language	English