Caution
For security reason, please modify password after you first login.
Continuous three times login failure will result in system alarm and five times
login failure will result in account lock!
Please reboot the device or wait for 30 minutes to try again if your account has
been locked.
After input corresponding user name and password, you can click OK button. System
goes to the startup wizard.
When there are all analog channels, the startup wizard includes general, encode,
schedule, record control, network, P2P.
When there is an IP channel, the startup wizard includes general, network, P2P,
remote device and schedule.
Click OK button, you can go to General interface. See Figure 4-7.
For detailed information, please refer to chapter 4.11.5.1.
Figure 4-7
Note
You can only see the remote device interface if you have set IP channel (Chapter
4.11.1.3.5)
Click Next button, you can go to network interface. See Figure 4-8.
To Next Page
Loading...
Need help?
General