Figure 4-64
Click the Manual Add button; you can go to the following interface. See Figure 4-65.
Channel number：The dropdown list here displays unconnected channel number. You can
go to Figure 4-64 to set remote channel connection.
Please note:
This series product supports the IPC from many popular manufactures such as Sony,
Hitachi, Axis, Samsung, Dynacolor, Arecont, Onvif and Dahua.
System default IP address is 192.168.0.0 if you do not input IP address. System will
not add current IP address.
You can not add two or more devices in the Manual Add interface (Figure 4-65). Click
OＫbutton, system connects to the corresponding front-end device of current channel
on the interface.
Figure 4-65
To Next Page
Loading...
