Installation Manual 3P291714-7H
DCM601B51 intelligent Touch Manager
41English
7. Press the Cancel button three times. You are now brought back to the screen shown in
Step 7-2.
<Step 7-1>
Group No
Set
1-03
Return
Release
Group No.
setting
(Group)
<Step 7-2>
Cool
Set temp
0000
30
30
C
Room
C
4.8.4 Setting an unique address to each unit (when power distribution is
enabled)
When power distribution is enabled, you need to set a unique address for each unit. For
how to set an address, refer to the commissioning manual.