Daikin DCM601B51 - Starting;stopping an area or management point

46 Installation Manual 3P291714-7H
DCM601B51 intelligent Touch Manager
English
6.3 Starting/stopping an area or management point
A(1)
(2)
(1) Select the area or management point you want to start or stop.
(2) On the On/Off combo box, select Start or Stop to start or stop the area/management
point, respectively. The icon is green or red (depending on the system setup) when
the area/management point is started (operating) and gray when stopped.
(3) (3)
(3) When Conrmation Dialog is set to “Enabled” in the system setup, the corresponding
message appears. Select the Yes button to conrm the Start/Stop operation.