DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
46
Dallmeier electronic
Fig. 8-2
Ø Clicking the Date eld opens a calendar in which you can select
the date directly.
Fig. 8-3
Ø You select the time by clicking the arrow buttons next to the
hours, minutes and seconds.
Ø The picture search is started by clicking Start.
If the relevant picture was found and you would like to view the
individual pictures before and after it, close the tabs by clicking the
Search function button. The standard playback functions are then
available once again.
8.2 Quick search with time intervals
With the quick search, time intervals are searched. The intervals
can be set by day, hour, minute and second in steps of 1, 5, 10 or
30.
Before calling up the search function and searching in time inter-
vals, please set a starting point for the quick search with the slider
knob in Playback mode. You can also use the „simple search“ by
date and time here. The corresponding picture is now the starting
point for the forward and back intervals.
With a setting of Hour/5, the time interval is 5 hours.
To Next Page
Loading...