DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
63
Dallmeier electronic
Fig. 9-6
Ø Activate the checkboxes (A) in order to display the export details.
Ø Finally complete the export with a click Close (B).
9.1.2 Simple export
The recorder can be switched to a simplied export mode. There-
fore the Simple Export option has to be activated in the Setup
> System > Options dialog (see documentation Installation and
Conguration).
The user only has to select the rst relevant image in the track. St-
arting with this point in time the function will save approximately the
same fraction of every track to the export medium.
Proceed as follows in order to select the relevant image.
Ø Switch to playback mode (see chapter Track selection).
A
B