dallmeier DLS 4 - 11 Reference Image Memory; Creating a New Reference Image Set

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
69
Dallmeier electronic
11 Reference image memory
The reference image memory is used for comparing image quality
and camera angle with revisions. It can then be determined whe-
ther the lens was adjusted or the physical position of the camera
changed.
The images saved at a specic point in time are called the refe-
rence image set.
11.1 Creating a new reference image set
Ø Open the Select track panel.
Ø Select Reference on the Longplay Tracks tab.
Fig.11-1: Select track panel
Ø Click on Open.
The Reference Image Memory dialog will be displayed.
Fig.11-2: Reference Image Memory