DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
91
Dallmeier electronic
16 Maintaining the unit
Changing the lter mat and possibly occasional cleaning of the
housing are the only maintenance work that you have to carry out
at your system.
16.1 Changing the lter mat
A lter mat is positioned behind the front panel in front of the intake
fan. This lter mat prevents dirt particles in the ambient air from
entering the unit.
A strongly soiled lter mat can impair the cooling air supply. This
can lead to a system failure due to overheating.
IMPORTANT
Change the lter mat regularly, at the latest when
it is gray.
The frequency of lter changes is dependent upon
the installation site and the degree of soiling as-
sociated with it. In normal ofce rooms, checking
every three months is generally sufcient, while a
monthly check would be recommended for rooms
with large amounts of dust (storage etc.).
Filter-change procedure
l The unit should be switched off (replacement is possible while
in operation, however).
l Open the front panel on the left side of the recorder.
l Remove the soiled lter mat.
l Remove lint/dust from the mesh with a dry cloth if necessary.
l Insert a new lter mat
l Close the panel.