dallmeier DLS 4 User Manual

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
55
Dallmeier electronic
If you cannot dene the search range (marking) exactly at rst, you
should rst activate the intersection search mode. After a rough
analysis you can set your marking again and specify a narrower
selection with the balance point search.
8.6 Use database
In the Camera settings dialog (see documentation entitled Instal-
lation and conguration) you can decide whether the recording
should be made using the database (DB).
Index search and Advanced search allow to access the data-
base.
Fig. 8-18: DB button
Click on the DB button to toggle between
„
Use DB“ and
„
Do not
use DB“.
Whether it is benecial to use the database for the search depends
on a large number of factors.
We recommend that you use the software setting. If the result is
unsatisfactory, you may attempt to improve performance by switch
the DB on or off.
Do not use DBUse DB

dallmeier DLS 4 Specifications

General

Brand	dallmeier
Model	DLS 4
Category	Measuring Instruments
Language	English